About

For the second week, our assignment was to vinyl cut something and to create a press-fit construction kit by laser cutting whichever material we choose. We were using the (WHAT IS THE NAME OF THE VINYL CUTTER) and the (WHAT IS THE NAME OF THE LASER CUTTER). In our storage, we had black, blue, white, red, and copper materials for vinyl cutting. The laser cutter we used is able to cut many different materials, however, it is unsafe to cut metals within it and also certain polymers. We were quickly trained on both of the machines. We are using mods to control the vinyl cutter, which makes it a lot easier to upload and print my designs. On the other hand, we are using (WHAT IS THE NAME OF THE SOFTWARE?????) for the laser cutter. This software is also not too hard to use, and easily allows you to move around the cut to where you want it and to create copies.

At first I was unable to think of what I wanted to vinyl cut, as I couldn't see an application related to clothing, unless it was just a sticker to put on it. Although this was a cool concept, I didn't really have any shirts that I felt comfortable adding a sticker to. So then, I tried to come up with cool concepts that I would want on my computer screen. After googling different things I was interested in, including Buffy the Vampire Slayer, dinosaurs, etc. Finally, I figured I would stick to the Disney theme. I wanted something a bit more complicated than just the mouse logo, so I tried finding a fun pattern. In the end, I picked something that had the Disney logo, the Mickey logo, and the main castle.

I right away had an idea for the press-fit construction kit to create flexible pieces of cardboard in order to build something similar to a shirt. It took a bit to decide what pattern I wanted to print. At first, I found different shapes that created flexible strips, however, they were only flexible in one axis. So, after searching for some more time, I was able to find a pattern that is able to bend in 2 axes. Since there were so many different patterns for flexibility in on direction, it took me some time to CAD 3 of the options. In the end, I was only able to use one, since the others were cutting too close together and just creating small strips. For example, one type was curved lines running perpendicular to the length of the strip, however to create a good degree of flexibility, I needed the lines to be close together. Yet, the laser cutter was unable to separate the lines after a certain point. For this reason, I kept my design simple and just used a line running down the strip.